0 Items

Ever-power Model B koppeling foar applikaasjes foar lichte oant middelgrutte plichten
Model B couplings aren’t interchangeable with standard Ever-power couplings.
Sizes 1 1/2 through 3 1/2 with integral end ring.
CENTRE FLANGE BOLTING
All couplings feature precision-drilled flange bolt holes, and tight tolerance. Quality 5 flange bolts to make sure a long-enduring flange to flange and fastener fit. Exposed bolt flanges are standard.
Shrouded bolt flanges can be provided through size 5. Size #5 1/2 and bigger couplings are only obtainable with exposed bolt flanges.

MISALIGNMENT FERIENINGEN
Ever-power couplings are designed for ± 1/2° static misalignment per half coupling. Minimizing operating misalignment will maximize the life span of the coupling. Make reference to the Set up and Alignment Instructions for alignment recommendations.

Altyd machtige KOPPELING Funksjes en foardielen

IMPROVED SOFT SEAL presents superior sealing in misaligned conditions.
UNIQUE TOOTH FORM utilizing a 40° pressure angle, distributes the load over a more substantial area than couplings which use a 20° pressure position.
Total TOOTH ENGAGEMENT reduces uneven wear on teeth that results in much longer existence plus improved performance.
QUALITY EXPOSED FASTENERS consists of SAE Quality 5 bolts with hex nuts and lock washers. Installation is simple, without special tools. Shrouded bolts optional.
CLEAR RUST INHIBITIVE AND CORROSION RESISTANT FINISH protects coupling in regular industrial environments.
AVAILABLE OFF-THE-SHELF in reborables with huge bore capabilities or stock finish bored.
OPTIONAL PILOT Bands provides positive register between similar halves. Eliminates selective assembly required in male, feminine sleeves.
INTERCHANGEABLE by half coupling with competitive coupling styles.
HIGHER MISALIGNMENT Capacity sizes 1-7 compensate for up to ±1 1/2° static angular misalignment per gear mesh.
Searjes H Gearkoppelingen

Series H couplings of Size 8 to 30 are designed for ±1/2° misalignment per flex fifty percent coupling, to compensate for misalignment between the shafts in a full-flex coupling. Series H couplings could be supplied in full-flex, flex-rigid, floating shaft and spacer plans along with custom designs. Just exposed bolt flanges can be found in sizes 8 to 30.

The straight-faced, involute stub tooth form can be used in the Series H coupling, sizes 8 to 30. This tooth form distributes contact pressures over the full amount of the hub tooth, to greatest develop the needed lubricating film, reducing tooth put on and extending coupling program life for years of operation. THE FINISH Rings are detachable for simple assembly and to enable inspection of the gear sets.
Hieltyd machtige gearkoppelingen

The Ever-power design, with its lifetime all-metal end ring, provides up to 300% greater lubricant capacity. This means that longer periods between relubrication may be scheduled.

The all-metal end ring, used exclusively in Ever-power couplings, eliminates the necessity for any type of perishable lube seal (o-rings, lip seals, cork gaskets, etc.). The finish ring not only provides the dam over which lubricant must circulation to escape, but it additionally pilots the sleeve with respect to the hub during start-up and shut-down functions. It further eliminates partial tooth disengagement with resulting tooth overloads by providing sleeve tooth which are flush against the within wall of the end ring.

It is the only coupling made to use oil lubrication.

To be sure that your couplings provide Maximum Life, constantly specify Ever-power couplings, with the all-metal end band.

The Straight-Faced involute hub tooth form featured in the Ever-power coupling is virtually unique in the industry today. It is this tooth type that distributes tooth contact pressures over the full amount of the hub tooth, best developing the needed hydrodynamic lube film, minimizing tooth wear and extending coupling life. It is the just hub tooth form available in the standard Ever-power coupling line.

Hieltyd machtige gearkoppelingen

FOLLE YNTAGINGSTANDEN
The Ever-power gear coupling has been made with full size tooth engagement with the inherent result of longer existence and improved performance.

OPTIONAL PILOT RINGEN
The standard Ever-powercoupling contains two identical half couplings. Optional precision metal pilot rings can be found when even more accurate centering of the two sleeves is required.

HIGH MISALIGNMENT SEAL
Competitive gear couplings include an O-ring seal. To be able to conform with today’s high misalignment capacities, this O-ring must match a groove that’s larger than the ring.Ever-power couplings use a truly great misalignment seal that seals remarkably under misaligned circumstances.

Ever-power POWERLIGN
This flangeless design transmits identical torques as the standard Ever-power Coupling. Having a smaller sized outside diameter, nevertheless, it is more compact, lighter, and will run at higher speeds. This alternative could be chosen for applications where space is bound.

SERIES H Funksjes en foardielen

Hegere Misalignment Capability
Grutte 1-7 kompensearje foar ± 1 1/2 ° statyske hoekferoaring per apparatuer gaas.
Minimizing working misalignment will maximize the life span of the coupling. Refer to the Installation and Alignment Instructions for alignment recommendations.
Gruttere boarmooglikheden tastean de meast ekonomyske seleksje fan grutte foar assen oant 10 5/8 ″.
Higher Torque Ratings due to bigger tooth pitch diameters than various other couplings.
Versatility for the reason that Series H’s are interchangeable by half coupling with competitive coupling Gearkoppeling 1ûntwerpen.
1 1/2° Curved-Face Teeth certainly are a primary feature of the Series H coupling, sizes 1-7. The crowned hub teeth certainly are a 20° full-depth involute tooth form with flank, tip, and root curvature. When
used with the straight faced sleeve teeth, these 1 1/2° curved encounter hubs offer elevated shaft misalignment capability
CENTRE FLANGE BOLTING
All couplings feature precision-drilled flange bolt holes, and tight tolerance Quality 5 flange bolts to assure a long-lasting flange to flange and fastener fit. Exposed bolt flanges are
standard. Shrouded bolt flanges can be supplied through size 5. Size #5 1/2 and bigger couplings are only obtainable with uncovered bolt flanges.

SMERING
Each sleeve flange is supplied with two pipe plugs 180° aside. This permits assembly of a complete flex coupling with four lube plugs positioned every 90°, facilitating lubrication. The lube seal is normally a Buna-N O-ring to help retain grease and exclude contaminants. KHP or KSG coupling greases are recommended to be able to obtain maximum operating life.

Altyd machtige KOPPELING Funksjes en foardielen

De koppeling foar altyd krêftige apparatuer komt yn twa basisproduktlinen:

Altyd machtige koppeling foar medium oant swiere applikaasjes
Grutte 1 1/2 oant 7 mei essensjele einring.
Maten 8 oant en mei 30 mei bolt-on-einring.