0 Items

This standard range of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo motor technology, providing restricted integration of the engine to the machine. Angular backlash of significantly less than 1 arc-mins is provided standard.

They can be purchased in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of electric motor couplings and installation flanges are for sale to assembly to practically all low backlash worm drive 1servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.

Typical applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
spiraal-wjirm servomotoren hawwe in koppelberik fan 92 Nm oant 520 Nm. As hoekige skiven binne se foaral romtebesparend en ferminderje se de útjeften foar weardefolle opsetromte.

The helical-worm servo gearmotors were lege wjerslach foar wjerljocht created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors offer you superb attenuation properties for the operation of your systems with low levels of vibration. This is usually due to the longitudinal software of drive on the insight shaft. This enables torque impulses to become prevented successfully and for maximum results with regards to running smoothness and sound reduction to be performed.

Both the gear unit, and the synchronous servomotor are based on our modular program. This allows you to have fully individual configuration possibilities for each application. One issue is for certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a gear in the form of a screw, also known as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.

While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is definitely that they generate an output that’s 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to change the direction of the output, a left-hands thread worm gearbox is required.
Sometimes a motor’s capability could be limited to the point where it requires gearing. As servo producers develop more powerful motors that can muscle mass applications through more complicated moves and create higher torques and speeds, these motors need gearheads equal to the task.